Yamaha HTR-5935 Owner's Manual page 27

CONNECTIONS
Once all connections are complete, plug the power cable
into the AC wall outlet.
To the AC wall outlet
AC OUTLETS {SWITCHED}
This unit equips 2 AC outlets. Use these outlets to supply
power to any connected components. Connect the power
cable of your other components to these outlets. Power to
these outlets is supplied when this unit is turned on.
However, power to these outlets is cut off when this unit is
in the standby mode or the power cable of this unit is
disconnected from the AC wall outlet. For information on
the maximum power or the total power consumption of the
components that can be connected to these outlets, see
"SPECIFICATIONS" on page 93.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, the stored data will be lost in case the power
cable is disconnected from the AC wall outlet or if the
power supply is cut off for more than one week.
23