Activating/Deactivating Call Waiting - (Cw) - Siemens Gigaset C1 User Manual

Activating/deactivating Call Waiting – (CW)
This function can be set up separately for each user. When call waiting is activated the
caller will hear the ringing tone if you are already making a call. This call is announced
both acoustically, and visually on your handset screen.
When call waiting is deactivated, the caller will hear the ringing tone if you are already
making a call and other phones are assigned to this MSN.
When call waiting is deactivated, the caller will hear the busy tone if you are already
making a call and yours is the only phone assigned to this MSN.
This function is activated when the phone is supplied. For call waiting with an external
call see page 25.
MENU
s
Base Settings
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
MENU
s
Call waiting
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 78).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select internal number, e. g. Int.11 .
Open the submenu.
Select the menu item and confirm (
OK
System settings
‰
= activated).
87