Using New Ringer Tones And Logos For The Handset - Siemens Gigaset C1 User Manual

SMS (text messages)
i
You can create a special directory for SMS within your directory by putting
an star (*) before the names.
Opening an attachment to an SMS
You can open an included attachment such as a logo. You can recognise an attachment
because it is placed between "less than" and "greater than" symbols (e.g., <Logo>). For
installation see page 69.
Precondition: You have opened a text message with attachment to read (page 65).
s
à
s
View Content
a
i
An SMS can contain multiple attachments.

Using new ringer tones and logos for the handset

You can install other melodies to use in addition to the one provided with the handset
and a logo (graphic) as well. For a selection of melodies and logos, browse these web
pages on the Internet: www.siemens-mobile.com/ringtones (melodies) and
www.siemens-mobile.com/logos (logos). The Internet pages will tell you which data is
available in your country.
You can use the following formats:
"iMelody" for melodies
◆
Large Picture (32*32) and Small Picture (16*16) for logos
◆
After you have ordered melodies and/or logos to be installed, you will receive one or
more SMS (in the incoming message list, page 63) with the data.
i
There are charges for installing data. Ask your service provider.
You can install a max. of five new melodies. Each new melody replaces one of the ten
melodies available in the handset, at most, the melodies 6–10.
The logo replaces the display in idle status(page 13), which could cover the date, time
and the name. You can installonly one logo.
The logo will disappear briefly under the following conditions:
Pressing any key,
◆
a battery warning tone, an appointment, reminder, or wake-up call is signalled,
◆
or you take the handset out of the base/charger or you return it there.
◆
68
Move the cursor to the line containing the attach-
ment.
Press display key to open menu.
Select the menu item and confirm.
OK
Long press (back to idle status).