Siemens Gigaset C1 User Manual page 189

Preparing to use the handset
Attaching the belt clip
on handset:
C2
Push the belt clip onto the back of the handset until the lugs click into the recesses on
either side of the handset.
Activating/deactivating the handset
To activate the handset, press the end call key
tion tone (rising tone sequence).
To deactivate the handset, press the end call key
(confirmation tone).
i
The deactivated handset activates automatically when placed in the base
or charger.
Activate/deactivate key block
You can lock the handset keypad if, for example, you are carrying the handset. This pro-
tects the keypad against inadvertent activation.
Press and hold the hash key
will appear in the display.
To deactivate the keypad lock, press the hash key
tone).
◆
i
◆
10
R
. You will hear a confirmation tone and the symbol
The keypad lock deactivates automatically when you receive a call. It
re-activates when the call is finished.
When the keypad lock is active, you cannot even call emergency num-
bers.
a
and hold. You will hear a confirma-
a
again in the idle status and hold
R
again and hold (confirmation
Ø