Activating/Deactivating Repeater Mode - Siemens Gigaset C1 User Manual

Activating/deactivating Auto engaged
When Auto engaged is activated, the exchange line becomes engaged as soon as the
receiver is picked up. This means that normal internal dialling is no longer possible.
However, an internal call can be made as an enquiry call by pressing the
MENU
s
Set base
s
Settings
~
OK
s
Setup user
Setup device
s
INT 21
MENU
s
Auto. seizure

Activating/deactivating repeater mode

You can increase the range of your handsets with the Gigaset Repeater. You can operate
up to six repeaters on your base. To ensure the repeater is installed correctly, repeater
mode must be activated on the base.
You can use this function to activate and deactivate repeater mode.
By factory default, this repeater capability is deactivated.
MENU
s
Set base
s
Settings
~
OK
s
System settings
s
Spec. function
s
Repeater
OK
a
Press display key to open menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 78).
Select the menu item and confirm.
OK
Confirm.
OK
Select the internal number, e. g., INT 1121.
Open the submenu.
Select the menu item and confirm.
OK
Press display key to open menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 78).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
Press the display key to confirm the prompt.
Long press (back to idle status).
Operating with other devices
S
‰
= activated).
key.
95