Siemens Gigaset C1 User Manual page 16

Example of how to assign an MSN:
You have applied for four MSN's, two for business use (MSN1, MSN2) and two for private
purposes (MSN3, MSN4). Four handsets are connected to a base. Two handsets (Int.11
and 12) and the answering machine AM 91 are intended for business use, and two
handsets (Int.13 and 14) and the answering machine AM 92 are intended for private
use.
Internal users
Handsets Int.11 , 12
Answering AM 91
machine
Handset Int.13
Handset Int.14
Answering AM 92
machine
The following applies to Comfort handsets S1, SL1:
Because internal 11 and internal 12 handsets are assigned two (receiving) MSNs each,
they can use the MSN next call performance feature (page 114). They can change to
(sending) MSN2 during each outgoing external call. The internal 13 and 14 handsets
cannot do this.
Launching the Getting started wizard and setting the basic settings
Launching the Getting started wizard:
v
s í
s
Installation
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
YES
~
OK
The Getting started wizard cannot be used simultaneously by multiple
◆
handsets.
If there is already settings data (factory default or previous settings),
◆
this data is shown at the appropriate positions in the display and can
i
be modified there.
To cancel the Getting started wizard, press the end call key and hold.
◆
All changes you have already saved using Save entry
retained. The handset returns to idle status.
To skip a setting, press the display key
◆
Use
Business
Private
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Press the display key to launch the Getting started
wizard.
If you already have set a system PIN (not 0000)
(page 91), you will be asked to enter it.
If required, enter the system PIN and confirm.
Preparing to use the handset
Receive MSN
MSN1 MSN2
,
MSN1 MSN2
,
MSN3
MSN4
MSN3 MSN4
,
.
§§NO§§
Send MSN
MSN1
---
MSN3
MSN4
---
are
§§OK§§
15