Siemens Gigaset C1 User Manual page 209

Using the directory and other lists
Adding a displayed telephone number to the directory
When a telephone number appears in the display (CLIP) you can add it to your directory.
You can do this while dialling from the last number redial list, from the calls list/answer-
ing machine list (on a Gigaset with answering machine) or during a call.
MENU
s
Copy to Directory
OK
~
MENU
Save Entry
a
Selecting a phone number from the directory
If you are prompted to enter an external telephone number while you are operating
your telephone, you can use the directory to do this.
Precondition: The input field for external telephone numbers is displayed.
h C
... then
s
OK
The telephone number is added to the entry field.
Sending a single entry or complete list to a handset
on handset:
C2
You can send single entries or the complete list to another handset that is registered on
the same base. This avoids entering information twice. VIP settings and speed dial
(shortcut) digits are not sent.
h C
s
MENU
either ...
s
Send Entry
or ...
s
Send List
... then
s
INT 2
a
30
Press display key to open menu.
Select the menu item and confirm.
OK
Confirm the telephone number.
If required, enter the name and press the display key.
Confirm. The entry is stored.
OK
Long press (back to idle status).
Open the directory or speed dial list.
Select entry and confirm.
Open the directory or speed dial list.
Select the entry and press the display key.
Send a single entry:
Select the menu item and confirm.
OK
Send complete list:
Select the menu item and confirm.
OK
Select the handset to which you wish to send the
OK
entry or list and confirm, e. g. handset 2. Your selec-
tions are sent to that handset.
Long press (back to idle status).