Siemens Gigaset C1 User Manual page 17

Preparing to use the handset
Setting the date and time:
Depending on the network provider, the date and time are adopted automatically from
the telephone network during the first outgoing call.
The display shows: Enter time?
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
~
Ð
s
Save entry
If the time should be displayed in 12-hour mode, you can modify the setting later
(page 94).
Hiding/showing answering machine
On the base:
SX150isdn
The following answering machines AM1, AM2, and AM3 are available. You can use the
answering machine when it is shown. By factory default, only AM1 is shown (only AM1
is displayed in the menus).
The display shows: Suppress display of AM1?
Respond with
, if you want to hide AM1,
◆
YES
with , if you want to use AM1.
◆
NO
This sequence will then be repeated for AM2 and AM3.
i
An answering machine can only be hidden if there are no messages/
memos stored in it (page 82).
Finding your phone numbers (MSN):
This function must be supported by your network provider.
The display shows: Find own numbers (MSN)?
Several phone numbers (MSN) were provided by the network provider when you
received your ISDN connection confirmation. You can store up to 10 phone numbers. If
an MSN has not been entered on your telephone, you can retrieve the phone numbers
from the telephone exchange.
16
Press the display key to set the date and time.
Enter the date (6-digit) and time (4-digit in 24-hour
mode) in series,
e.g. 200903 0945 for 9/29/03 9:45 a.m..
Press the display key to open the submenu.
Select the menu item and confirm.
OK
CX253isdn SX255isdn SX353isdn