Activate/Deactivate Call Beats Data; Changing The Long Distance Prefix - Siemens Gigaset C1 User Manual

System settings

Activate/deactivate Call beats data

On the base: SX205isdn
Using Call beats data you can set if a call is rejected or signalled during data transmis-
sion.
Your ISDN connection offers you 2 simultaneously usable telephone lines (B channels).
Both channels are used at the same time to transmit data.
Call beats data off (factory setting):
◆
Calls during data transmission are rejected. The caller hears the busy signal.
Call beats data on:
◆
When there are calls during data transmission, the data connection is automatically
reduced to one B channel and the call is signalled.
v
s í
s
Settings
~
OK
s
ISDN settings
s
Call beats data

Changing the long distance prefix

Long distance prefixes are the first few digits required when dialling another city
(national) or to another country (international). In Germany, the factory default is:
0
00
In other countries, different long distance prefixes could be used. In this case you need
to change this setting.
Otherwise, you wouldn't be able to make some calls, such as ringbacks, from the call
list.
v
s í
s
Settings
~
OK
s
ISDN settings
s
Lg.-dist. code
s
National : 0
v
s
Change number
126
SX255isdn SX303isdn
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
For connections to other towns (national)
For connections abroad (international)
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select type of long distance prefix,
e.g. National : 0.
Open the submenu.
Select the menu item and confirm.
OK
SX353isdn
‰
= On).