System settings
so that the call is forwarded in your base (internal call forwarding); this means both
◆
telephone lines are engaged
◆
◆
i
◆
◆
For each receive MSN you can store a destination number for each of the three following
conditions:
Immediately – On busy – On no reply
Set-up external call forwardings are entered in a list. Active call forwardings are identi-
fied in this list.
When the phone is supplied external call forwarding is not set.
Setting the location for call forwarding
When the phone is supplied Forward. netw. is set.
v
s í
s
Settings
~
OK
s
ISDN settings
either ...
s
Forward. base
or ...
s
Forward. netw.
118
.
You bear the costs for the call forwarding.
If the call is forwarded in the base station (internal call forwarding),
then the condition "When busy" is not available.
All three conditions can be activated at the same time.
If Night service was set up for an incoming MSN (page 98), external
call forwarding cannot be set up or changed for this incoming MSN.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
Select the menu item and confirm (
OK
‰
= set).
‰
= set).