Setting Up Ring Delay - Siemens Gigaset C1 User Manual

v
s
Hunt group

Setting up ring delay

Ring delay can be used to individually set up a party per incoming MSN to ring later. Dur-
ing this ring delay time, the handset can take the call using the function "Accept?" with-
out hearing a ring. The ring delay time is given in rings. There are 5 seconds between
rings.
The factory default setting is 0 rings (= not activated).
Take into account the reaction time of the answering machine when making this setting
(factory default: Automatic 2/4). If the set ring delay is longer than the setting for an
active answering machine, the phone will not ring, because the answering machine will
answer it first.
For each programmed MSN, at least one party must be able to be called immediately.
Therefore, a party set up for ring delay will be called immediately if he is the only one
on this incoming MSN, or no one else can be reached on this incoming MSN.
Picking up a call during ring delay see page 25.
v
s í
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
v
s
Ring delay
s
~
OK
Open the submenu.
Select the menu item and confirm (
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select internal number, e.g. Int.11 .
Open the submenu.
Select the menu item and confirm.
OK
Select incoming MSN, e.g. MSN11: Anna, and con-
OK
firm.
No. of rings required.
System settings
‰
= activated).
123