Operating The Base - Getting Started Wizard - Siemens Gigaset C1 User Manual

Preparing to use the handset
Operating the base – Getting started wizard
A few settings are necessary before using your telephone. The Getting started wizard is
designed to help you with this. It can be opened anytime using your handset. The fol-
lowing settings can be set one after the other.
Date and time
◆
Hide/show answering machine 1... 3 (on Gigaset with integrated answering
◆
machine)
Find out/enter the MSN of your connection
◆
Set the device type for the connected device
◆
Set the incoming MSN
◆
Set the outgoing MSN
◆
Outside line code (when using a PABX)
◆
What is an MSN?
MSN = Multiple Subscriber Number. You can apply for up to ten different telephone
numbers for one multiple ISDN connection. An MSN is one of the phone numbers
assigned to you without an area code.
You telephone uses the MSN entirely as you require. The following differentiation is
made:
Receive MSN: Phone numbers you may be called on. You can assign the receive
◆
MSN's to specific internal users (terminals)(page 113). Incoming calls are only for-
warded to the terminals to which the relevant MSN has been assigned. Terminals
are, for instance, handsets or answering machines.
Send MSN: Phone numbers that are identified to the person you are calling. The net-
◆
work operator calculates charges based on the send MSN's. You can assign a fixed
send MSN to each internal user (page 114).
Potential internal parties:
Depending on the scope of function of the base, you can assign internal phone numbers
to the following internal users. The operating instructions for the base will indicate
which internal phone numbers are available.
Handsets
◆
Base station (CX203isdn, CX253isdn, SX303isdn, SX353isdn)
◆
Analogue devices (SX205isdn, SX255isdn, SX303isdn, SX353isdn)
◆
PC via a USB connection (SX205isdn, SX255isdn, SX303isdn, SX353isdn)
◆
Bluetooth devices (SX303isdn, SX353isdn)
◆
Data modules
◆
Answering machine integrated in the base
◆
14