Siemens Gigaset C1 User Manual page 133

Operating when connected to a PABX
Dial * and #
Once Dial * and # has been activated, the * and # characters are transmitted during dial-
ling as commands to the exchange or PABX.
Regardless of the setting options above, after dialling or during the conversation, the
phone switches automatically to tone dialling (DTMF), for instance for remote control
of an answering machine.
v
s í
s
Settings
~
OK
s
System settings
s
Spec. function
s
Dial properties
s
Standard dial
Activating/deactivating the keypad during a call
In addition to the ongoing settings described above, you can also switch over temporar-
ily to the keypad.
The setting is only applicable to the current external call and is automatically deacti-
vated after the call is ended.
v
either ...
s
Keypad on?
~
or ...
s
Keypad off?
Activating the keypad for the next connection
All dialling characters (0–9, *, #) will be sent as a string of keypad characters with the
next connection (dial and call). In the connection status, the keypad is retained and is
not automatically switched over to tone dialling (DTMF).
v
s í
s
Call preparat.
s
Temp. keypad
132
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the setting and confirm, e.g. Standard dial
OK
‰
( = activated).
Open the menu.
Activate the keypad:
Select the menu item and confirm.
OK
Enter the keypad code.
Deactivate the keypad:
Select the menu item and confirm.
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
‰
= activated).