Operating When Connected To A Pabx; Access Code; Dialling Options - Siemens Gigaset C1 User Manual

Operating when connected to a PABX

Operating when connected to a PABX
i
Note the special features of text messages on PABXs (page 50).

Access code

Precondition: If your telephone is connected to a PABX, you must
– depending on your PABX – enter an access code for external calls when you use the
machine for the first time. See the operating instructions for your PABX. You can enter
a one to four-digit access code.
For incoming calls, the access code is automatically placed in front of the caller's phone
number in the display and in the calls lists, and likewise when copied to the directory.
The saved phone number can then be dialled e. g. directly from the caller list (see
page 32).
MENU
s
Base Settings
s
Settings
~
OK
s
System settings
Access code
~
MENU
Save entry
i
For manual dialling and entering directory, emergency and direct dial
numbers you must also enter the access code.

Dialling options

The KEYPAD function allows you to control certain services by entering sequences of
characters and digits.
You should set the KEYPAD function if your telephone is connected to an ISDN PABX or
to an exchange (e. g. Centrex), which is controlled by means of a KEYPAD protocol. The
digits/characters 0 to 9, *, # are transmitted as keypad information elements. Please
inquire of your service provider about which information and codes you can transmit.
96
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 78).
Select the menu item and confirm.
OK
Confirm.
OK
Enter access code and open the menu.
Confirm.
OK