Siemens Gigaset C1 User Manual page 78

Activating the room monitor function and entering the "call to" number for
the first time
v
s é
Room Monitor
r
s
R[RRRRRRRRRRRRRRRRRRRR]
Edit
either ...
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
INT
~
R[RRRRRRRRRRRRRRRRRRRR]
Save
or ...
~
à
Save Entry
... then
s r
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
Save
Once the room monitor is activated, switch directly to the room monitor setting with v
(open menu).
If you want to copy the external phone number from the directory,
◆
press the bottom of the control key s in the input field for the phone
i number (open directory). Select an entry with s and confirm
with
If you enter an external number as the destination number, only the
◆
last 4 digits will appear in the input field.
Step 1: Open input field for room monitor:
Open the menu.
Select the menu item and confirm.
OK
Confirm. The input field is opened.
OK
Step 2: Activate room monitor:
Go to the line Room M.: On.
Step 3: Enter the destination number:
Jump to the line Call to: and press the display key.
The input field for the phone number is opened.
Enter an internal number as the destination
number:
Press the display key.
Enter the internal phone number and press the dis-
play key. If the room monitor should call all regis-
tered handsets, then enter P instead of an internal
phone number (group call).
Enter an external number as the destination
number:
Enter the telephone number.
Press the display key.
Confirm. The entry is stored.
OK
Step 4: Set the sensitivity:
If required, jump to the line Level: and set the sensi-
tivity for the noise level (Low or High).
Press the display key. The room monitor function is
now activated.
.
OK
Operating more than one handset
77