Setting The Walk And Talk Mode - Siemens Gigaset C1 User Manual

Using several handsets
Deactivating the room monitor remotely
You can deactivate the room monitor remotely. Take the call from the room monitor and
O R
press . The room monitor function will deactivate about 90 seconds after the
call ends. The room monitor will make no further calls. The other room monitor func-
tions on the handset (e. g. no ringer) will remain activated until you press MENU and
OK on the handset that is in the baby's room.

Setting the Walk and Talk mode

on handset:
C2
The Walk and Talk function allows two C1 handsets to communicate with each other no
matter how far they are from the base.
Example: You go on holiday and take two handsets with Walk and Talk functionality
with you. Set the Walk and Talk function on both handsets. You can now communicate
using the handsets.
Precondition:
Both handsets have been registered to the same base or
◆
Both handsets are registered to different bases and both are set to Best Base
◆
(page 15) or
One of the handsets is not registered to any base and the registered handset is set
◆
to Best Base or
Neither handset is registered to a base.
◆
In Walk and Talk mode
i
the maximum range between handsets is 300 metres outdoors,
◆
the handsets cannot be reached by incoming calls,
◆
handset operating times are severely curtailed.
◆
72