Siemens Gigaset C1 User Manual page 81

Operating more than one handset
Activating/deactivating the Walk and Talk mode
v
s é
s
Walk and Talk
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
Off
If, when you are in Walk and Talk mode, you press the talk key c or the handsfree
key d, the call will go to all the handsets that are in Walk and Talk mode. The connec-
tion is made with the first handset to answer the Walk and Talk call.
◆
i
◆
◆
Using a handset in Walk and Talk mode as a room monitor
You can also use the room monitor function in Walk and Talk mode.
à
s é
s
Room Monitor
s r
s r
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
Save
The room monitor will call all the handsets that are in the Walk and Talk mode.
W
Always check the settings of the room monitor before you leave
home, e.g. sensitivity and phone line.
Press the display key
The handset returns to the normal Walk and Talk mode.
80
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Deactivate the Walk and Talk mode:
Press the display key.
"Selecting the ringer" (page 105), "Activating/deactivating ringer or
advisory tones" (page 109) and "Activating/deactivating keypad lock"
(page 10) are available in Walk and Talk mode.
To open the menu, press the display key ©.
The Walk and Talk mode is retained even when you switch your
handset off and back on.
Press the display key.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Jump to the line Room M.: and activate the room
monitor.
If necessary, scroll to the Level: line and set the sen-
sitivity for the noise level (Low or High).
Press the display key. The room monitor function is
now activated.
on the room monitor handset to deactivate the room monitor.
Off