Getting Started; Installation - Siemens optiPoint 150 S Administration Manual

Getting Started

Getting Started
This chapter describes how to connect the individual elements on your
optiPoint 150 S (

Installation

7
1. Insert the connector on the handset cable into the handset jack and the
2. Connect the power supply to the wall outlet.
3. Connect the power supply to the jack on the underside of the tele-
8
page 8) and start up your device (
Only use switches in the LAN where optiPoint 150 S is operating.
Using switches in hubs can cause serious malfunctions in the hubs
themselves and in the entire network.
The RJ connectors on all cables must audibly click into place when
plugged in.
other end into the left-hand jack on the telephone (1).
Only use the power supply provided to operate your
7
optiPoint 150 S (Germany/IM): AD-0980B
phone (2).
page 10).
Handset (1)
LAN connection (3)
Power supply (2)
Slot for wall mounting
(2x)
Bracket for wall mount-
ing
For self-adhesive
rubber feet (4x)