Preparing The Base Station For Use - Getting Started Wizard - Siemens Gigaset SX303isdn User Manual

Preparing the base station for use – Getting started wizard
A few settings are necessary before using your base station. The Getting started wizard
(page 16) is designed to help you with this. It can be called up at any time using the
display on your base station (page 16) or using an added=feature S44, S1 or SL1
handset (see handset operating instructions). The following settings can be set one
after the other.
Date and time
◆
Show/hide answering machine 1... 3 (on CX253 or SX353isdn)
◆
Find out/enter the MSN for your connection
◆
Set the device type for the connected device
◆
Set the receive MSN
◆
Set the send MSN
◆
Outside line code (when using a PABX)
◆
Alternatively, you can make settings on your base station using a PC (see operating
instructions for PC software).
Operating instructions for the S44, S1, SL1, C34, C1, C2 and C32 handsets can be found
on the enclosed CD and on the Internet at www.siemens.com/service.
What is an MSN?
MSN = Multiple Subscriber Number. You can apply for up to ten different telephone
numbers for one multiple ISDN connection. An MSN is one of the phone numbers
assigned to you without an area code.
You telephone uses the MSN entirely as you require. The following differentiation is
made:
Receive MSN: Phone numbers you may be called on. You can assign the receive
◆
MSNs to specific internal users (terminals) (page 96). Incoming calls are only
forwarded to the terminals to which the relevant MSN has been assigned. Terminals
can be e.g. handsets or answering machines.
Send MSN: Phone numbers that are identified to the person you are calling. The
◆
network operator calculates charges based on the send MSN's. You can assign a
fixed send MSN to each internal user (page 96).
Internal users
Your base station is assigned the fixed internal number 10.
Possible internal users are:
INT11 – INT18:
INT21:
INT40:
INT41 – INT48:
INT51 – INT53:
INT91 – INT93:
Handsets
Analogue devices, such as an analogue telephone, fax machine
or modem
PC via USB connection on base station
Data modules (page 136)
Bluetooth devices such as a Bluetooth compatible GSM mobile,
headset or PC. A PC registered using Bluetooth is automatically
assigned an internal number between 51 and 53
Integrated answering machine (on SX353isdn)
Preparing the base station for use
15