Table of Contents
Advertisement
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
General Information
This system provides a real-time clock, which must be
set in order for the system's event log to keep track of
events by time and date. It must also be set in order to
execute scheduling programs (Time-Driven events).
Setting the Time and Date
To set the real time clock, perform the following steps:
Step
Action
1
Enter Installer or Master Code + [#] 63.
Typical display shows:
TIME/DATE –– THU
12:01 AM
The day of the week is automatically
calculated based on the date entered. Time
and date entries are made by simply entering
the appropriate hour, minute, month, day
and year.
Press [✳] to move the cursor to the right of
the display, to the next position.
Press [#] to move the cursor to the left of the
display, to the previous position.
2
Enter the correct hour. Then press [✳] to
move to the "minutes" field.
3
Enter the correct minutes. Press [✳] to move
to the AM/PM position.
4
Press any key 0-9 to change AM to PM, or PM
to AM. Press [✳] to move cursor to the
"month" field position.
5
Enter the correct month using a 2-digit entry.
Press [✳] to move cursor to the "day" field
position.
6
Enter the correct day using a 2-digit entry.
Press [✳] to move cursor to the "year" field
position.
7
Enter the correct year.
Press [✳] to continue.
Press [✳] to exit the real-time clock edit
mode.
Setting the Real-Time Clock
01/01/90
WWW.DIYALARMFORUM.COM
S E C T I O N
Use a 6139/6160 alpha keypad to set the real-
time clock, or set the clock via the downloader
software. Only users with Installer or Master
authority level can set the clock.
8
8-1
Advertisement
Table of Contents
