Below is a list of the main menus. For details refer to the VISTA-50P/VISTA-50PUL Programming Guide.
MAIN MENU
ZONE PROG?
1 = YES 0 = NO
0
EXPERT MODE?
1 = YES 0 = NO
0
ALPHA PROG?
1 = YES 0 = NO
0
DEVICE PROG?
1 = YES 0 = NO
0
RELAY PROG?
1 = YES 0 = NO
0
RLY VOICE DESCR?
1 = YES 0 = NO
0
CUSTOM INDEX ?
1 = YES 0 = NO
0
Following is a list of commands used while in the Menu Mode:
#93
Enters Menu Mode.
[✳]
Serves as [ENTER] key. Press to have keypad accept entry.
[#]
Backs up to previous screen.
0
Press to answer NO.
1
Press to answer YES.
Quits Menu Mode and goes back to Data Field Programming Mode, if entered at first prompt of each main menu option.
00, or 000+[✳]
OPTIONS
For programming the following:
•
Zone Number
•
Zone Response Type
•
Partition Number for Zone
•
Dialer report code for zone
•
Input Device Type for zone (whether RF, polling loop, etc.)
•
Enrolling serial numbers of 5800 Series transmitters & serial polling loop devices into the system.
Same as Zone Programming except:
•
Done with a minimum number of keystrokes.
•
Can program wireless keys using pre-defined templates.
For entering alpha descriptors for the following:
•
Zone Descriptors
•
Installer's Message
•
Custom Words
•
Partition Descriptors
•
Relay Descriptors
For defining the following device characteristics for addressable devices, including keypads, RF
receivers (5881), output relay modules (4204), and 4285/4286 VIP Module:
•
Device Address
•
Device Type
•
Keypad Options (including Partition assignment)
•
RF House ID
For defining output device functions.
For entering voice descriptors for relays to be used with the 4285/4286 VIP Module.
For creating custom word substitutes for VIP Module annunciation.
#93 Menu Mode Programming Commands
WWW.DIYALARMFORUM.COM
Section 4 – Programming
4-3