Table of Contents
Advertisement
FIELD
TITLE and DATA ENTRIES
Scheduling Report Codes Report
2*14
Codes (Second Digit)
Enter 00-15.
Enable GOTO for this Partition
2*18
(partition-specific)
0 = disable
1 = enable
Use Partition Descriptor
2*19
0 = disable
1 = enable
Enable J7 Triggers for Partition
2*20
(partition-specific)
0 = disable
1 = enable
Supervision Pulses for LRR
2*21
0 = disable
1 = enable
EXPLANATION
This field has eight two-digit entries as follows: Early Opening, Early
Closing, Late Opening, Late Closing, No Opening (late to open), No
Closing (late to close), Auto-Arm Failure, and Access Schedule Changed.
Enter the report code 01-15 for each type of report. Enter 00 for no report.
If enabled, this partition can be accessed from another partition's keypad
using the GOTO command.
If enabled, the normal keypad display will include a partition number and
four-digit descriptor.
If enabled, the J7 triggers function for this partition.
There are three entries in this field as follows: Fire, Burglary/Audible
Panic, Silent Panic/Duress.
If enabled, causes the control to send periodic short pulses on the J7 radio
triggers to the LRR. The LRR uses these pulses to determine that its
connection to the control is still intact.
Must be 1 for UL installations.
WWW.DIYALARMFORUM.COM
Section 5 – Data Field Descriptions
5-15
Advertisement
Table of Contents
