Shared Call Appearance (Sca) Call Bridging - Aastra 6735i User Manual

Additional Features
The following table provides the behavior of the preferred line focus feature with other features on the phone.
Phone Feature Preferred Line Behavior
BLF The phone switches back immediately after the call ends.
Call Return The phone switches back to the focused line immediately after the call ends.
Caller ID If the Switch UI Focus To Ringing Line parameter is disabled, you can see the Caller ID when the phone switches the focus
to the ringing line.
Conference For incoming calls, the phone switches back immediately after the call ends.
Dialing For incomplete dialing on a non-preferred line, the focus does not change if some digits are entered.
If no digits are entered or digits were cleared, the focus changes to preferred line after the time out has passed without activ-
ities.
Factory Default Factory default and recovery mode clears the Preferred Line and Preferred Line Timeout parameters, and the phone oper-
ates in a non-preferred line mode.
Park The phone switches back immediately after the call ends.
Redial The phone switches back immediately after the call ends.
Speed Dial The line is already specified when the speed dial is created. The phone switches back immediately after the call ends.
Transfer/Xfer For incoming or outgoing calls, the current behavior is that the same line used to transfer the call does not change. For incom-
ing calls, the phone switches back immediately after the call transfers.
Voicemail The phone switches back immediately after the call ends.
Notes:
• If a value of 0 is specified for the preferred line parameter, it disables the preferred line focus feature.
• If a value of 0 is specified for the preferred line timeout parameter, the phone returns the line to the preferred line
immediately.

Shared Call Appearance (SCA) Call Bridging

Shared Call Appearance (SCA) is when incoming calls are presented to multiple phones simultaneously. For example, it is
the ability to assign the boss' extension to a button on the secretary's phone. Calls can be transferred between two
phones with the same extension button by simply putting the call on hold at one phone and picking it up on the other.
Status LEDs light and flash in unison, allowing all people sharing the extension to see the status at a glance.
The phones include an enhanced SCA for the servers that support call bridging and allows two or more SCA users to be
connected in a call with a third party. Refer to the following example.
52
6735i/6737i User Guide for Clearspan – 2862-002 – September 2014