Call Forward; Preferences - Aastra 6735i User Manual

Accessing the IP Phone Options
1. Press the Options key
To go to an option, use 5 and 2 to scroll through the list, or press the number corresponding to the option.
2.
Press the Select softkey, the 4 button, or the corresponding digit number to select an option.
3.
4. Use the softkeys that display for each option to change a selected option.
5. Press the Done button to save the change.
button, the 3 button, or the
6. Press the

Call Forward

You can use the Options menu to set your phone to automatically forward incoming calls when you are already in a call,
when you don't answer, or always. You can access Call Forward settings from the Options menu or from a configured Call
Forward softkey. For more information, refer to

Preferences

Ring Tones and Tone Sets
You can configure ring tones and ring tone sets on the IP phone. There are several distinct ring tones you can select from
to set on the IP phones. Your System Administrator can enable/disable these ring tones on a global or per-line basis.
The following table identifies the valid settings and default values for each type of configuration method.
Configuration Method
IP Phone UI
Lines 1 to 9
The ring tone default is set to US. The country-specific tone is heard on the phone for the following:
• dial tone
• secondary dial tone
• ring tone
• busy tone
• congestion tones
• call waiting tone
• ring cadence pattern
6735i/6737i User Guide for Clearspan – 2862-002 – September 2014
on the phone to enter the Options list.
button at any time to exit without saving changes.
"Call Forward Key"
Valid Values
Global
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Silent
Per-Line Setting:
Global
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Silent
on page 36.
Default Value
Global Setting:
Tone 1
Per-Line Setting:
Global
Options Menu
23