Blf/Xfer - Aastra 6735i User Manual

BLF/Xfer

The BLF key allows one or more extensions to be monitored, and once there is any state change with those extensions, the
key shows the status of the monitored lines. The Xfer key allows a call to be transferred to other recipients blindly or con-
sultatively. The BLF/Xfer key combines the BLF and Xfer key's functionality together allowing you to transfer calls or use BLF
with one key. You can use this key to perform the BLF function as well as use it as a transfer key to transfer calls.
Note:
It is recommended that the Switch UI Focus to Ringing Line parameter be enabled when using the BLF/Xfer feature.
For more information about this parameter, see
• BLF/Xfer and BLF: A BLF/Xfer key can be configured to subscribe to an extension and monitor the status of the exten-
sion, similar to the BLF key functionality. Changes of the state of the monitored extension are indicated by an LED/icon.
• BLF/Xfer and Blind Transfer Calls: When the focused line is in the connected state, pressing the BLF/Xfer key transfers
the call to the extension unconditionally, disregarding the status of the monitored extension.
If transferring a call to an extension fails, a message Transfer Failed displays on the phone, and you can reconnect the
call (get the call back) by pressing the line key again.
• BLF/Xfer and Call Forward: When the focused line is in the ringing state, pressing the BLF/Xfer key forwards the call to
the extension unconditionally, disregarding the status of the monitored extension.
• BLF/Xfer and Speed Dial: When the focused line and the monitored extension are idle, pressing the BLF/Xfer key causes
the phone to go offhook and dial the number of the extension.
6735i/6737i User Guide for Clearspan – 2862-002 – September 2014
Line Keys, Programmable Keys, and Softkeys
"Stuttered Dial Tone" on page 55.
35