Configuring Dhcp Client On Hdlc Encapsulated Link; Monitoring And Maintaining Information; Monitoring And Maintaining Dhcp Server - D-Link xStack DGS-3610 Series Configuration Manual

DGS-3610 Series Configuration Guide
20.5.19 Configuring DHCP Client on HDLC
Encapsulated Link
Our product supports the HDLC-encapsulated port to obtain a dynamically assigned IP
address using DHCP. To configure the DHCP client, execute the following command in the
interface configuration mode:
Command
DGS-3610(config-if)# ip address dhcp
20.6 Monitoring and Maintaining
Information
20.6.1 Monitoring and Maintaining DHCP
Server
Three types of commands are available for monitoring and maintaining the DHCP server:
1. Clear commands, used to clear such information as DHCP address binding, address
conflict and server statistics status;
2. Debug commands, used to output necessary debugging information. Such commands
are mainly used to diagnose and clear faults;
3. Show commands, used to show information about DHCP.
Our product provides three clear commands. To clear information, execute the following
commands in the command execution mode:
Command
DGS-3610# clear ip dhcp binding { address |
*}
DGS-3610# clear ip dhcp conflict { address |
*}
DGS-3610# clear ip dhcp server statistics
To debug the DHCP server, execute the following command in the command execution
mode:
Command
DGS-3610# debug ip dhcp server [events |
packet]
To show the working status of the DHCP server, execute the following commands in the
command execution mode:
Chapter 20 DHCP Configuration
Function
Configure to obtain an IP address via DHCP
Function
Clear DHCP address binding information
Clear DHCP address conflict information
Clear DHCP server statistics status
Function
Debug the DHCP server
20-11