Bgp Configuration Examples; Configuring Bgp Neighbor - D-Link xStack DGS-3610 Series Configuration Manual

DGS-3610 Series Configuration Guide
*> 211.21.26.0/24
*> 1.1.1.0/24
*> 179.98.0.0
*> 192.92.86.0
*> 192.168.88.0
*> 200.200.200.0
At present, use the regular expression in the show command. The effect is shown as
follows:
DGS-3610# show ip bgp regexp __300__
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Status Network
------ ------------------ ---------------
*> 211.21.21.0/24 110.110.110.10 0
*> 211.21.23.0/24 110.110.110.10 0
*> 211.21.25.0/24 110.110.110.10 0
*> 211.21.26.0/24 110.110.110.10 0

29.18 BGP Configuration Examples

The following lists the BGP configuration.

29.18.1 Configuring BGP Neighbor

The following will show how to configure the BGP neighbor. Use the neighbor remote-as
command to configure the BGP neighbor. The concrete configuration is shown as follows:
router bgp 109
neighbor 131.108.200.1 remote-as 167
neighbor 131.108.234.2 remote-as 109
neighbor 150.136.64.19 remote-as 99
Configure one IBGP peer 131.108.234.2 and two EBGP peers such as 131.108.200.1 and
150.136.64.19.
The following is an example to configure the bgp neighbor. For the relationship among
routers and the assignment of the IP addresses, refer to the schematics.
110.110.110.10 0
192.168.88.250 444
192.168.88.250 444
192.168.88.250 8883
192.168.88.250 444
192.168.88.250 777
Next Hop
Chapter 29 BGP Configuration
1000 300
0 606
0 606
0 606
0 606
0 606
Metric LocPrf Path
-------- -------- -------------------
1000 200 300
1000 200 300
1000 300
1000 300
29-25