Qos Display; Showing Class-Map - D-Link xStack DGS-3610 Series Configuration Manual

Chapter 45 QOS Configuration
Command
configure terminal
mls qos map ip-prec-dscp
dscp1...dscp8
no mls qos map ip-prec-dscp
For Example:
DGS-3610# configure terminal
DGS-3610(config)# mls qos map ip-precedence-dscp 56 48 46 40 34 32 26 24
DGS-3610(config)# end
DGS-3610# show mls qos maps ip-prec-dscp
ip-precedence dscp
------------- ----
0 56
1 48
2 46
3 40
4 34
5 32
6 26
7 24

45.3 QOS Display

45.3.1

Showing class-map

You may show the contents of class-map through the following steps:
Command
show class-map [class-name]
For example,
DGS-3610# show class-map
Class Map cc
Match access-group 1
DGS-3610#
45-14
DGS-3610 Series Configuration Guide
Description
Enter the configuration mode
Modify the setting of IP-Precedence-to-Dscp Map, where
dscp1...dscp8 are the DSCP values corresponding to
IP-Precedence values 0~7
Description
Show the contents of the class map entity