Showing Dai Configuration; Showing Dai Enabling Status Of Vlan; Showing Dai Configuration Status Of Each Layer 2 Interface - D-Link xStack DGS-3610 Series Configuration Manual

Chapter 43 Dynamic ARP Inspection Configuration

43.3 Showing DAI Configuration

43.3.1 Showing DAI Enabling Status of
VLAN
To show the enabling status of VLAN, execute the following command in the global
configuration mode:
Command
DGS-3610(config)# show ip arp inspection
vlan
43.3.2 Showing DAI Configuration Status of
Each Layer 2 Interface
To show the DAI configuration status of each layer 2 interface, execute the following
command in the global configuration mode:
Command
DGS-3610(config)# show ip arp inspection
interface
43-6
DGS-3610 Series Configuration Guide
Function
Show the enabling status of each VLAN
Function
Show the DAI configuration of each layer 2
interface (including trust status and rate
restriction)