Network Accounting; Preparations For Accounting; Configuring Accounting; Monitoring Aaa Users - D-Link xStack DGS-3610 Series Configuration Manual

Chapter 37 Configuration of 802.1X
37.8.2

Network Accounting

The network accounting provides the accounting information about user session, including
the packet number, bytes, IP address and username.
Note
37.8.3

Preparations for Accounting

The following tasks must be completed before the AAA accounting is configured:
Enable the AAA security server. For details, see AAA Overview.

Define the security protocol parameters. Our product supports the Radius security

protocol. For details of the RADIUS, see Configuring RADIUS.
37.8.4

Configuring Accounting

To configure the AAA accounting function, execute the following command in the global
configuration mode:
Command
configure terminal
aaa new-model
radius-server host ip-address [auth-port
port]
[acct-port port]
end
show radius server
configure terminal
aaa accounting network acct start-stop
group radius
Note
37.8.5

Monitoring AAA users

To view the information of the current login users, run the following commands in the
privileged user mode:
37-14
The format of Radius accounting information varies with the Radius
security server. The contents of the account records may also vary with
our product version.
The keyword start-stop is used for the network access server to send the
accounting information at the start and end of the network service to the
security server.
DGS-3610 Series Configuration Guide
Function
Enter the global configuration mode.
Turn on the AAA switch.
Configure the RADIUS server
Return to the privileged mode.
Show the RADIUS server.
Enter the global configuration mode.
Configure the AAA network accounting function.