Tech. Rep. Choice - Minolta Di151 Service Manual

FrameMaker Ver5.5E(PC) Di151 SWITCHES ON PWBs/TECH. REP. SETTINGS
2000.02.03
(3)

Tech. Rep. Choice

• Allows the Tech. Rep. to make the settings for the various service functions.
<Procedure>
1. Press the 1Key as necessary to select the desired Tech. Rep. Choice code.
2. Press the Start key to validate the choice code.
3. Using the 10Key and 1Key, select the choice data.
4. Press the Start key to validate the choice data setting (C1 to C3).
<Exiting the Mode>
• Press the Clear/Stop key.
Choice Code
Select the display options for paper sizes and fixed zoom ratios
according to the applicable marketing areas.
C1
Default: 0 (Metric areas)/1 (Inch areas)
Select whether or not to inhibit the initiation of a new copy cycle after
a toner-empty condition has been detected.
C2
Select whether or not to stop predrive of the Fusing Rollers when the
Start key is pressed.
C3
Setting (The default is
<Marketing Area>
Data 0
Description Metric areas
<Toner Empty Stop>
Data
0
Description Copying permitted
<Predrive>
Data
0
Description Predrive disabled
S-15
Highlighted ).
1
Inch areas
1
Copying inhibited
1
Predrive enabled