Removal Of The Ir Unit - Minolta Di151 Service Manual

FrameMaker Ver.5.5E(PC) Di151 DIS/REASSEMBLY, ADJUSTMENT
00.03.21
(2)

Removal of the IR Unit

Remove the IR Unit after the Front Upper Cover, Front IR Cover, Rear IR Upper Cover,
Rear Upper Cover, Rear Lower Cover, and Right IR Cover have all been removed.
1. Protective Cover
2. Control Board
NOTE
Unplug all print jacks from the PWB.
Control Board
3. ADF Set Switch hookup connector
4. IR Unit
IR Unit
Protective Cover
4007D010AB
ADF Set Switch
Hookup Connector
4007D011AB
D-11