Miscellaneous; Torsion Bar Position Adjustment - Minolta Di151 Service Manual

FrameMaker Ver.5.5E(PC) Di151 DIS/REASSEMBLY, ADJUSTMENT
00.03.21
4.

MISCELLANEOUS

4-1.

TORSION BAR POSITION ADJUSTMENT

NOTE
When an Automatic Document Feeder or Fax Unit is mounted on the copier, the position of
the torsion bar must be adjusted as detailed below.
1. Remove the Front Upper Cover and control panel.
2. Release and swing up the upper half of the copier.
3. Remove the torsion bar attachment plate.
4. Change the position of the torsion bar in the attachment plate as necessary.
Torsion Bar
Hole
Factory setting or when the Original Cover is mounted
A
When the Fax Unit is mounted
B When the Automatic Document Feeder is mounted
C When both the Automatic Document Feeder and Fax Unit are mounted
5. Secure the torsion bar attachment plate into position.
Torsion Bar Attachment Plate
Copier Configuration
D-39
4007D054AA
4007D055AA