FrameMaker Ver.5.5E(PC) Di151 TROUBLESHOOTING
00.03.10
2.
PAPER TRANSPORT FAILURE
2-1.
Paper Misfeed
When a paper misfeed occurs, the display shows both the misfeed location and paper loca-
tion.
Lit
Misfeed/Paper Location
Copier paper take-up
PC
Manual bypass paper take-up
PF-116 paper take-up
J2
Transport
J3
J8
<Resetting misfeed display>
Misfeed in the copier
Misfeed in the option
2-2.
Size Error
When a size error occurs, the display gives a warning code.
Warning Code
The paper size setting on the paper source does not match the size
H2
of the paper actually loaded.
<Resetting error display>
Press the Clear/Stop key.
<Causes of a size error>
• Wrong paper size setting is made on the paper source.
• User loads paper of a wrong size in the paper source.
• Double feeding of paper occurs.
Exit
AF-8
Open the relevant door, remove the misfeed and
paper left inside, and close the door.
Size Error
T-2
Action Ref. Item
2-5. (1)
2-5. (1)
2-5. (4)
2-5. (2)
2-5. (3)
See the relevant option
service manual.
When the option is mounted.
OP