Exit Misfeed - Minolta Di151 Service Manual

FrameMaker Ver.5.5E(PC) Di151 TROUBLESHOOTING
00.03.10
(3)

Exit Misfeed

Paper Exit Sensor PS3
Exit Misfeed Clearing Procedure
• Paper has stopped at the exit section.
Step
1 Paper Exit Roller rotation
2 Paper Exit Roller is dirty, deformed, or worn.
3 Paper Exit Sensor operation: the voltage
across PJ8A-6 on the Master Board and GND
is DC0 V (sensor unblocked) and DC5 V (sen-
sor blocked).
Relevant Electrical Parts
Master Board PWB-A
PJ8A-4(ANODE PS3)
PJ8A-5(GND)
PJ8A-6(PS3 ON)
PWB-A
Check
T-6
PJ5
3
2
PS3
1
4007C04TAB
Result Action
NO Correct drive coupling.
YES Clean or change.
YES Change Master Board.
NO Correct actuator.
Change sensor.