Minolta Di151 Service Manual page 74

FrameMaker Ver5.5E(PC) Di151 SWITCHES ON PWBs/TECH. REP. SETTINGS
2000.02.03
(4) Adjust
• Used for adjustments to be made before shipment at the factory.
<Procedure>
1. Press the 1Key as necessary to select the desired Adjust code.
2. Press the Start key to validate the Adjust code. At the same time, currently set data is
displayed.
3. Using the 10Key and 1Key, change the data.
4. Press the Start key to validate the data setting.
<Exiting the Mode>
• Press the Clear/Stop key.
Adjust Code
Adjust the zoom ratio in the CD direction on the IR side (for copies).
A1
Data
Description Smaller
Adjust the zoom ratio in the FD direction on the IR side (for copies).
A2
Data
Description Smaller
Adjust registration in the CD direction on the IR side (for copies).
A3
Data
Description -5.0mm
Adjust registration in the FD direction on the IR side (for copies).
A4
Data
Description -3.0mm
Adjust the zoom ratio in the CD direction on the IR side (when the
Automatic Document Feeder is used).
A5
Data
Description Smaller
Setting (The default is
<Zoom Adjustment in CD Direction (Copy)>
45.................................
<Zoom Adjustment in FD Direction (Copy)>
45.................................
<Registration Adjustment in CD Direction (Copy)>
40.................................
<Registration Adjustment in FD Direction (Copy)>
46.................................
<Zoom Adjustment in CD Direction (AF-8)>
45.................................
S-17
).
Highlighted
50 ................................ 55
Greater
................................ 55
50
Greater
................................ 60
50
±0 +5.0mm
50 ................................ 60
±0 +5.0mm
................................ 55
50
Greater