Function - Minolta Di151 Service Manual

FrameMaker Ver5.5E(PC) Di151 SWITCHES ON PWBs/TECH. REP. SETTINGS
2000.02.03
(2)

Function

• Allows the Tech. Rep. to run paper passage and other tests.
<Procedure>
1. Press the 1Key as necessary until "F" appears on the display.
2. Press the Start key to let the copier start the sequence.
<Exiting the Mode>
• Press the Clear/Stop key.
Code
Checks for correct paper passage.
<Procedure>
1. Select the paper source before entering the Tech. Rep. mode
F1
(when the copier is equipped with a Paper Feed Unit).
2. Press the Start key to let the copier start the paper passage
sequence.
3. Press the Clear/Stop key to stop the sequence.
Checks to see if the Exposure Lamp turns ON properly and the Scan-
ner operates correctly.
F2 <Procedure>
1. Press the Start key. This turns ON the Exposure Lamp and lets
the Scanner make a scan motion.
2. Press the Clear/Stop key to stop the operation.
Checks the Automatic Document Feeder for correct document pas-
sage.
F3 <Procedure>
1. Place paper on the Document Feed Tray.
2. Press the Start key to let the Automatic Document Feeder start
the document take-up and feeding sequence.
Checks to see if the Scanner operates properly and paper is fed
through the copier correctly.
<Procedure>
F4 1. Place the original on the Original Glass.
2. Press the Start key. This turns ON the Exposure Lamp and lets
the Scanner make a scan motion.
3. A copy is produced.
4. Press the Clear/Stop key to stop the operation.
Produces a test pattern for adjusting the Paper Tray for correct align-
F5
ment and registration in the main scanning and sub-scanning direc-
tions.
F6
Produces a halftone pattern.
Description
<Paper Passage Test>
<Scanner Test>
<Original Passage Test>
<Scanner & Paper Passage Test>
<Test Pattern 1>
<Test Pattern 2>
S-13