Minolta Di151 Service Manual page 20

FrameMaker Ver.5.5E(PC) Di151 DIS/REASSEMBLY, ADJUSTMENT
00.03.21
No. Name
1 Original Cover Remove screws that secure the Original Cover.
2 Original Glass Remove 1.
Remove 7.
at the front).
3 Front Upper Cover Remove screws that secure the Front Upper Cover.
4 Control Panel Remove 3.
5 Front Middle Remove 3.
Cover Front Middle Cover.
6 Front Lower Cover Release and swing up the upper half of the copier.
screws that secure the Front Lower Cover.
7 Front IR Cover Remove 3.
8 Paper Tray Remove 9.
the Paper Tray.
9 Manual Bypass
Tray
10 Paper Exit Tray Remove 9.
Lower Cover Remove screws that secure the Paper Exit Tray Lower Cover.
11 Left IR Cover Remove 1.
Remove 12.
12 Rear IR Upper Remove 1.
Cover Rear IR Upper Cover.
13 Rear Upper Cover Remove 14.
Cover.
14 Rear Lower Cover Remove screws that secure the Rear Lower Cover.
15 Right Cover Release and swing up the upper half of the copier.
the 14.
16 Right IR Cover Remove 3.
Remove screws that secure the Right IR Cover.
Removal Procedure
Remove 13. Remove 12.
Remove the Original Glass holding brackets (two
Remove screws that secure the control panel.
Remove 4. Remove screws that secure the
Remove screws that secure the Front IR Cover.
Release and swing up the upper half of the copier.
Remove 6. Remove 14.
Remove 6. Remove 14.
Remove 3. Remove 7.
Remove screws that secure the Left IR Cover.
Remove 13. Remove screws that secure the
Remove screws that secure the Rear Upper
Remove screws that secure the Right Cover.
Remove 1. Remove 13.
D-5
Remove 3.
Remove
Remove the screw that secures
Remove 8.
Remove 13.
Remove
Remove 12.