Turn Area On; Turn All Areas On; Turn All Areas Off; Move To Area - Bosch Solution 16i User Manual

Solution 16 User Guide
i
If the area is turned Part 2 On, the keypad will display:
4. To exit, press [OK].
Areas > Commands >

Turn Area On

This menu allows you to turn a single area All On. If your
system has been configured to have multiple areas then
the keypad will prompt you to select the area you wish to
turn All On.
1. Enter your Master PIN + [MENU].
2. Enter [2] + [0] + [1] + [OK].
If your system has been configured to have more than
one area, the keypad will display the A = prompt.
3. Enter the area number you wish to turn All On, then
press [OK].
Areas > Commands >

Turn All Areas On

This menu allows you to turn on all areas that your PIN
has been assigned to at the same time All On. The keypad
displays below show the area icons 1 and 2 on indicating
that both Area 1 and Area 2 are armed.
1. Enter your Master PIN + [MENU]
2. Enter [2] + [0] + [2] + [OK].
The keypad will display the word "LEAVE" in the
display and the exit warning beeper will sound. You
should leave all areas now.
POWER
When exit time has expired, the keypad will display
that the home area (Area 1 in this case) is on, and that
area 2 is also on via the area icons.
16
PArt 1
PArt 2
L201
MENU 2-0-1
A=
L202
MENU 2-0-2
ON
POWER
Area icons will only display if programmed to do so
i
by your security installer.
Note
Areas > Commands >

Turn All Areas Off

This menu allows you to turn off all areas that your PIN has
been assigned to at the same time. At least one keypad
on the system must be in a diasrmed area before you can
access this command.
1. Enter Master PIN + [MENU].
2. Enter [2] + [0] + [3] + [OK].
The system will now disarm all areas that are in the
armed condition provided the user belongs or has
access to the area.
Areas > Commands >

Move To Area

This menu allows you to move the focus of a keypad's
default home area to a different area. Once the keypad's
focus has changed, you will be able to see the status of the
zones in that area and also perform functions as if you were
using the keypad located or assigned to that area.
1. Enter [Master PIN] + [MENU]
2. Enter [2] + [0] + [4] + [OK].
If your system has been configured to have more than
one area, the keypad will display the A = prompt.
3. Enter the area number (1 to 4) that you want to move
to, then press [OK].
The keypad will now move to the requested area. If you
do not have acces to the selected area the system will
sound a error beep and the keypad focus will remain
un-changed.
The keypad will return to it's home area, 30 seconds
after the last key press.
If the keypad has been programmed to be a roaming
i
keypad then you can use the [←] and [→] keys to
Note
move between areas at any time.
AREA
ON
L203
MENU 2-0-3
L204
MENU 2-0-4
A3 OFF
Bosch Security Systems 6/09 BLCC500U FTR1.03