Delete Pin; Proximity Tokens & Cards; Add Token - Bosch Solution 16i User Manual

Solution 16 User Guide
i
3. Enter the user number that you want to add, then
press [OK].
If you select a user number which already exists, an
error beep will sound. If this happens select a different
user number.
4. Enter the new PIN for the user you have selected.
If an error tone sounds, try a different PIN. The display
will show ==== as you enter the new PIN.
5. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Access > PIN Codes >

Delete PIN

This menu allows a master user the ability delete another
users PIN. A Master user can only delete a PIN for users that
have been assigned to the same area(s) as the Master user.
A Master user cannot delete their own PIN.
1. Enter your Master PIN + [MENU].
2. Enter [1] + [1] + [3] + [OK].
The keypad will display the Ur = prompt.
3. Enter the user number you want to delete, then press
[OK].
If you have selected a valid user, the system will ask you
to confirm the deletion.
4. Press [OK] to delete the PIN, or press [MENU] to
cancel.
12
Ur=
EntPin
DELPin
MENU 1-1-3
Ur=
Del ?
Proximity Tokens & Cards
Proximity tokens and cards can be used as an alternative to
a PIN number when on and off the system.
A token is a small plastic tag card that has a unique ID. A
user can place the token card in front of a reader keypad to
turn the system or specific areas on and off.
This feature requires that at least one keypad that has an in-
build prox reader fitted. This section outlines how to add
and delete proximity tokens or cards. If you try to add a
token from a keypad that does not have an in-built reader,
the keypad will prompt you to select the reader you wish
to learn the new token.
You should discuss this feature with your installer for more
details on your particular installation.
Access > Token >

Add Token

This menu allows a master user to add a new token for
other users provided they are assigned to the same area(s)
as the Master user.
This feature requires that at least one keypad that has an
in-build prox reader fitted.
1. Enter your Master PIN + [MENU].
2. Enter [1] + [2] + [0] + [OK].
The keypad will display the Ur = prompt.
2. Enter the user number you want to add the token to,
then press [OK].
If you are currently using a keypad with built in reader
the system will prompt you to present the new token
to the keypad.
2. Present the token at the keypad to learn the new
token.
AddPrO
MENU 1-2-0
Ur=
PrSEnt
Bosch Security Systems 6/09 BLCC500U FTR1.03