Table of Contents
Advertisement
Security System
User Guide
Keypad Adjust (Cmd 49)
I can perform this command.
I cannot perform this command.
Use Command 49 to adjust the command center sounder volume and the display brightness.
1.
Press [CMD] [4] [9]. Enter a valid passcode if prompted.
2.
To adjust the command center sounder volume, press and hold the [*] key and then press [1] to increase the
volume or [4] to decrease the volume.
3.
To adjust the command center display brightness, press and hold the [*] key and then press [3] to increase the
brightness or [6] to decrease the brightness.
4.
Press [CMD] to exit this command function when all adjustments are made.
Turn the System Off
Entry Delay Time (to be filled in by your security company).
You have __________ sec. to enter premises and turn system off.
Enter your passcode to turn the security system off. When the system is on, you must enter through a designated entry door
to prevent an alarm. Opening a designated door, such as the Front Door, starts the entry delay. During entry delay time, the
command center emits a double tone to remind you to turn the system off. Enter your passcode before the entry delay time
expires to turn the system off.
If you enter through the wrong door or fail to turn the system off before the entry delay time expires, you may cause an
alarm. If an alarm occurs, silence the alarm by entering your passcode and call your security company to let them know that
there is no emergency situation.
1.
When the system is on, the On indicator illuminates. If the system is All On, the command center display
shows:
If the system is Part On, the command center display shows (Part 2 On shows if the system is Part 2 On):
2.
Enter your passcode to turn the system off. Once the system is off and there are no faulted points, the
command center displays the idle text (second line) as shown below:
46841D
Smiths Residence
All On
Smiths Residence
Part On
Smiths Residence
OK for All On
D623/D625 User Guide
Page 10
© 2003 Bosch Security Systems
Advertisement
Table of Contents
