Bezel Release Latch - IBM xSeries 205 Type 8480 Hardware Maintenance Manual And Troubleshooting Manual

Bezel release latch

Before you begin:
v Read "Safety information" on page 117.
v Review the information in "System reliability considerations" on page 33.
To remove the bezel-release latch, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server.
3. Remove the side cover. See "Removing the side cover" on page 40.
4. Remove the front bezel. See "Removing the front bezel" on page 67.
5. Remove the handle assembly. See "Handle assembly" on page 82.
6. Remove the top/side cover. See "Top/side cover" on page 81.
7. Press down on the tab.
8. From the underside, grasp the bezel release latch in the center and gently pull it
80
IBM xSeries 205 Type 8480: Hardware Maintenance Manual and Troubleshooting Guide
back and away from the server.