Bezel-Release Latch - IBM 84885BU Maintenance And Troubleshooting Manual

Bezel-release latch

Before you begin:
v Read Appendix B, "Safety information," on page 143.
v Review the information in "System reliability guidelines" on page 25.
To remove the bezel-release latch, complete the following steps:
1. Turn off the server, if it is on.
2. Disconnect the power cord from the power source and from the server; then,
3. Remove the side cover (see "Removing the side cover" on page 28).
4. Remove the front bezel (see "Removing the bezel" on page 30).
5. Remove the CD-ROM drive (see "CD-ROM drive" on page 70).
6. Pull down from inside the server to release the latch tab.
7. From the underside, grasp the bezel-release latch in the center, and gently pull
disconnect all external cables.
it back and away from the server.
Chapter 5. Field replaceable units
93