Bezel-release latch
Before you begin:
v Read "Safety information" on page 129
v Review the information in "System reliability considerations" on page 33
To remove the bezel-release latch, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server, and disconnect the power cord; then, disconnect all external
3. Remove the side cover. See "Removing the side cover" on page 36
4. Remove the front bezel. See "Removing the bezel" on page 37
5. Remove the CD-ROM drive. See "CD-ROM drive" on page 94
6. Pull down from inside the server to release the latch tab.
7. From the underside, grasp the bezel-release latch in the center, and gently pull
cables.
it back and away from the server.
Chapter 5. Field replaceable units
97