Server Connectors - IBM xSeries 205 Type 8480 Hardware Maintenance Manual And Troubleshooting Manual

Hard disk drive activity LED: When this LED is flashing, it indicates that the hard
disk drive is in use.
Power-on LED: When this LED is lit, it indicates that the server is turned on.
Power-control button: Press this button to turn the server on and off manually.
Ethernet transmit/receive activity LED: When this LED on the Ethernet connector
is lit, it indicates that there is activity between the server and the network.

Server connectors

The following illustration shows the connectors on the rear of the server.
Rear View:
Power-cord connector: Connect the power cord to this connector.
Mouse connector: Connect a mouse or other PS/2
Keyboard connector: Connect a PS/2 keyboard to this connector.
Parallel connector: Connect a parallel device to this connector.
Serial 1 connector: Connect a 9-pin serial device to this connector.
Serial 2 connector: Connect a 9-pin serial device to this connector
USB 1 connector: Connect a USB device to this connector.
USB 2 connector: Connect a USB device to this connector.
Ethernet connector: Use this connector to connect the server to a network.
Mic connector (pink): Connect a microphone to this connector.
Power cord
Mouse
Keyboard
Parallel
Serial 1
Serial 2
USB 1
USB 2
Ethernet
Line out (green)
Line in (blue)
Mic (pink)
Video
®
device to this connector.
Chapter 1. General information
5