Server Controls, Leds, And Connectors; Server Controls And Leds - IBM xSeries 205 Type 8480 Hardware Maintenance Manual And Troubleshooting Manual

Server controls, LEDs, and connectors

This section describes the controls, light-emitting diodes (LEDs), and connectors on
your server.

Server controls and LEDs

The following illustration shows the controls and LEDs on the server.
Note: The front bezel door is not shown so that the drive bays are visible.
Front View:
Ethernet speed 1 Gbps LED: When this LED on the Ethernet connector is lit, it
indicates that the Ethernet network speed is 1 Gbps. When this LED is off, it
indicates that the Ethernet network speed is 10 Mbps or 100 Mbps.
CD-eject button: Press this button to release a CD from the CD-ROM drive.
CD-ROM drive activity LED: When this LED is lit, it indicates that the CD-ROM
drive is in use.
Diskette-eject button: Press this button to release a diskette from the diskette
drive.
Diskette drive activity LED: When this LED is lit, it indicates that the diskette drive
is in use.
4
IBM xSeries 205 Type 8480: Hardware Maintenance Manual and Troubleshooting Guide
Ethernet speed 1 Gbps LED
Ethernet transmit/receive activity LED
CD-eject
button
CD-ROM drive
activity LED
Diskette-eject
button
Diskette drive
activity LED
Hard disk drive
activity LED
Power-on
LED
Power-control
button
System error
LED