Power supply
Before you begin:
v Read "Safety information" on page 117.
v Review the information in "System reliability considerations" on page 33.
To remove the power supply, do the following:
1. Turn off the server, if it is on.
2. Unplug the server.
3. Remove the cover. See "Removing the side cover" on page 40.
4. Disconnect internal cables from the planar and drives.
5. Remove the screws from the rear of the server.
6. Gently move the power supply away from the chassis and lift it out of the
server.
73
Chapter 5. Field replaceable units