IBM xSeries 205 Type 8480 Hardware Maintenance Manual And Troubleshooting Manual page 106

Note: See "System" on page 110 to determine which components should be replaced by a field service technician.
Error code/symptom
151 (Real time clock error)
161 (Real time clock battery error)
162 (Device configuration error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configuration.
163 (Real-time clock error)
164 (Memory configuration changed.)
184 (Power-on password damaged)
185 (Drive startup sequence information
corrupted)
187 (VPD serial number not set.)
188 (Bad EEPROM CRC #2)
189 (An attempt made to enter the system
with invalid passwords)
201 (Memory test error.)
289 (DIMM disabled by the user or
system.)
301 (Keyboard or keyboard controller
error)
303 (Keyboard controller error)
602 (Invalid diskette boot record)
96
IBM xSeries 205 Type 8480: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
1. Run diagnostics.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Failing device.
4. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Set serial number in the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
1. DIMM
2. System board
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
1. Keyboard
2. System board
v System board
1. Diskette
2. Diskette drive
3. Drive cable.
4. System board