Electrical Connection - Travis Industries Xtreme 6020 Installation Manual

Electrical Connection


The electrical line to the grounded receptacle inside the fireplace must be installed by a qualified
installer and must meet all local codes.

Make sure the household breaker is shut off prior to working on any electrical lines.

The appliance, when installed, must be electrically grounded in accordance with local codes or, in the
absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical
Code, CSA C22.1.

The electrical line must supply 120 Volts, 60 Hz, and minimum 5.7 Amps.

Route the electrical connection through the zc cover plate and junction box cover plate and attach to
the hookup wires pictured below.
Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause
improper and dangerous operation.
Hot
(black)
Common
(white)
Ground
(green)
© Travis Industries
Installation
(for qualified installers only)
Romex
Clamp
Black
White
Green
Exhaust Damper Wire Harness
4140717
Receptacles
Electrical Hookup Wires
(labeled 120VAC IN)
Exhaust Blower Wires
21
100-01351