Electrical Connection (Required) - Travis Industries 564 SS Installation Manual

Electrical Connection (required)

•
The electrical line to the junction box inside the fireplace must be installed by a qualified installer and
must meet all local codes.
•
Make sure the household breaker is shut off prior to working on any electrical lines.
•
The appliance, when installed, must be electrically grounded in accordance with local codes.
•
The electrical line must be a min. 14 gauge, and supply 240 Volts at 50 Hz (2 Amps)
Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause
improper and dangerous operation.
Junction Box Assembly
Grounded 240V Power Supply
(Insulate wire ends)
© Travis Industries
Installation
(for qualified installers only)
Left Side of Fireplace
Strain Relief
4070620
19
100-01199_000